- 7 Brookside Terrace North Caldwell, NJ 07006
Thermal Treatments
Thermal Treatments Temperature Measurements Lasers, Focused Ultrasound and Ablation
This is a configuration page for applications involving temperature measurements for characterizing lasers in media.The Osena products work from a wavelength of 950 nm and up. These are typically used in Surgical Tools and to characterize heating from lasers. Products are shown for Focused Ultra Sound and Ablation applications
They are often used for FDA submissios
The numbers in the chart represent the quantity of each line item required to complete the configuration.
| P/N | Transmitters | Description | Products Type | Temp Range | Fiber Optic Temperature Test Systems for RF Ablation Temperature Monitoring 4 Channel - Probes in Bundle stomach does not get burned accidently This is for research and manufactures testing. Used for Tumor Ablation Research | Medical Focused Ultrasound or HiFu Temperature Measurement System Single Channel | Medical Fiber Optic Temperature Test System for Guided Laser Ablation Development Characterization Single Channel Used for Phantoms and Animal Studies 980-1064 |
| FGA-0051A | FTX-300-LUX+ | 3 Ch, USB, 4-20mA, RS-485 | Temperature Transmitter | -95 to +450°C | 1 | ||
| FGA-0050A | FTX-200-LUX+ | 2 Ch, USB, 4-20mA, RS-485 | Temperature Transmitter | -95 to +450°C | 1 | ||
| FGA-0049A | FTX-100-LUX+ | 1 Ch, USB, 4-20mA, RS-485 | Temperature Transmitter | -95 to +450°C | |||
| FGA-0148B | FTX-300-LUX+HG | 3 Ch, USB, 4-20mA, RS-485 | Temperature Transmitter | -95 to +450°C | |||
| FGA-0147B | FTX-200-LUX+HG | 2 Ch, USB, 4-20mA, RS-485 | Temperature Transmitter | -95 to +450°C | |||
| FGA-0146B | FTX-100-LUX+ HG | 1 Ch, USB, 4-20mA, RS-485 | Temperature Transmitter | -95 to +450°C | 1 | ||
| FGA-0244A | FTX-300-LUX+HGLA (HG Laser Ablation, 980/1064nm) | 3 Ch, USB, 4-20mA, RS-485 | |||||
| FGA-0243A | FTX-200-LUX+HGLA (HG Laser Ablation, 980/1064nm) | 2 Ch, USB, 4-20mA, RS-485 | |||||
| FGA-0242A | FTX-100-LUX+HGLA (HG Laser Ablation, 980/1064nm) | 1 Ch, USB, 4-20mA, RS-485 | 1 | ||||
| P/N | Probes for FTX-300/200/100-LUX+(HG) Transmitters | Tip Diameter, Material, Core | Products Type | Temp Range | |||
| FGA-0039A | PRB-G20-2M-ST-C | 0.45mm Polyimide, 200µm GOF | Temperature Sensor | -40 to +250°C | |||
| FGA-0061A | PRB-G20-2M-ST-HC | 0.45mm Polyimide, 200µm GOF | Temperature Sensor | -40 to +350°C | |||
| FGA-0010A | PRB-G40-2M-ST-C | 0.75mm Polyimide, 400µm GOF | Temperature Sensor | -40 to +250°C | |||
| FGA-0060A | PRB-G40-2M-ST-HC | 0.75mm Polyimide, 400µm GOF | Temperature Sensor | -40 to +350°C | |||
| FGA-0214A | PRB-140-2M-STM-MRI-50 | 0.50mm ETFE, 100µm GOF | Temperature Sensor | -40 to +100°C | 2 | ||
| FGA-0008A | PRB-G20-2M-STM-MRI-(xxx) | 0.30mm Polyimide, 200µm GOF | Temperature Sensor | -40 to +100°C | |||
| FGA-0213B | PRB-242-2M-STM-MRI (-CRYO +$100) | 0.50mm ETFE, 200µm GOF | Temperature Sensor | -40 to +150°C | |||
| FGA-0009A | PRB-G40-2M-STM-MRI | 0.75mm Polyimide, 400µm GOF | Temperature Sensor | -40 to +100°C | |||
| FGA-0197B | PRB-420-2M-STM-RED (End Point Sensor) | 0.7mm ETFE, 400µm GOF | Temperature Sensor | -40 to +120°C | |||
| FGA-0193A | PRB-500-2M-STM-MRI | 1.0mm Nylon, 500µm POF | Temperature Sensor | -40 to +100°C | |||
| PRB-500-2M-HFBR-MRI | 1.0mm Nylon, 500µm POF | ||||||
| FGA-0007A | PRB-100-2M-STM-MRI | 1.5mm Nylon, 1000µm POF | Temperature Sensor | -40 to +100°C | |||
| PRB-422-35M-STM-L | |||||||
| FGA-0152A | PRB-4x220-2M-STM-MRI-1350-C | 0.900mm Poyimide, 4x200µm GOF | Temperature Sensor | -40 to +100°C | 1 | ||
| P/N | Probes for FTX-301/201/101-LUX+HT Transmitters | Tip Diameter, Material, Core | Products Type | Temp Range | |||
| FGA-0173A | PRB-1000-0.35M-ST-HT-750 | 5mm Alumina Ceramic, 1000µm GOF | Temperature Sensor | -40 to +750°C | |||
| Probes for Laser Temperature Measurements | |||||||
| FGA-0230A | PRB-221-2M-STM-MRI-500 | Temperature Sensor | 1 | ||||
| FGA-0249A | PRB-521-2M-STM-MRI | Temperature Sensor | 1 | ||||
| P/N | Extension Cables | OD Material, Core Daimeter | Products Type | Temp Range | |||
| FGA-0014A | EXT-100-2M-STM-STM | 2.3mm Nylon, 1000µm POF | Extension Cable | -40 to 85°C | |||
| FGA-0014A | EXT-100-12M-STM-STM | 2.3mm Nylon, 1000µm POF | Extension Cable | -40 to 85°C | 1 | ||
| FGA-0045A | EXT-200-2M-STM-STM | 2.2mm PVC, 200µm GOF | Extension Cable | -20 to 80°C | |||
| FGA-0089A | EXT-230-2M-ST-ST (200um) | 2.2mm LSZH, 200µm GOF | Extension Cable | -40 to +80°C | |||
| FGA-0035A | EXT-400-2M-STM-STM | 2.2mm PVC, 400µm GOF | Extension Cable | -20 to 80°C | |||
| FGA-0035A | EXT-400-12M-STM-STM | 2.2mm PVC, 400µm GOF | Extension Cable | -20 to 80°C | |||
| FGA-0035A | EXT-400-12M-STM- HFBR | 2.2mm PVC, 400µm GOF | Extension Cable | -20 to 80°C | |||
| FGA-0229A | EXT-500-5M-STM-STM | 1.0mm Nylon, 500µm POF | Extension Cable | -20 to 70°C | 1 | ||
| P/N | Accessories | Description | |||||
| FGA-0015A | ACC-CON-ST-ST (Metallic) | ST Fiber Coupler Connector | |||||
| FGA-0124A | ACC-CON-STM-STM (Non-Magnetic Polymer) | ST Fiber Plastic Coupler Connector | 2 | 1 | |||
| FGA-0037A | ACC-CON-HFBR-HFBR, Optical Fiber Connector | HFBR Plastic Coupler Connector | |||||
| FGA-0023A | ACC-CON-TBUS | DIN Rail Tbus Connector | 1 | 1 | 1 | ||
| FGA-0052B | ACC-USB Base Short | 5 Device Base Station | 1 | 1 | 1 | ||
| FGA-0052A | ACC-USB-BASE (Original) | Multi-Device Base Station | |||||
| P/N | Software | Description | |||||
| FGA-0016A | OSENSA View Basic ( Very Limited for reading) | Device Configuration Software | |||||
| FGA-0011A | OSENSA View Pro (2 User)- University | Logging, Gaphing, Calibration, 2 users | |||||
| FGA-0011C | OSENSA View Pro (5 User)- Commercial Companies | Logging, Gaphing, Calibration, 5 users | 1 | 1 | 1 |